3/14/20 - The original state of the boat.

3/24/20 - The bulkheads are ready for fiberglass.

Recessed deck fittings are fabricated.

One side of footbrace studs are installed.

4/2/20 - The hull is half sanded.

Before and after sections.

Hatch lips and recessed fittings are sealed with epoxy.

4/4/20 - A thick bead of epoxy is applied to the bow.

4/6/20 - Fiberglass cloth is laid on the hull.

The cloth is saturated with epoxy.

8/8/20 - Two fill coats of epoxy are applied to the hull.

4/9/20 - Time to work on the deck.

4/10/20 - The deck is sanded.

4/13/20 - Fiberglass cloth is laid on the deck.

The fiberglass is saturated with epoxy.

4/14/20 - The glass is trimmed.

4/15/20 - Two fill coats of epoxy have been applied.

4/16/20 - Hatch shapes are drawn on the deck.

The hatches are cut out.

Recessed deck fittings are epoxed in place.

4/20/20 - The recessed fittings are sanded and taped off for fiberglassing.

The fiberglass is saturated.

Coaming riser is epoxied in place.

4/21/20 - The coaming lip is epoxied in place.

4/22/20 - The aft bulkhead is installed.

The forward bulkhead is installed.

4/23/20 - Fiberglass cloth is laid on the coaming lip.

The glass is saturated with epoxy.

The forward hatch lip is epoxied in place.

4/24/20 - The fiberglass is trimmed and an epoxy fill coat is added.

The aft hatch lip is epoxied in place.

4/29/20 - The boat is sanded and ready for varnish.

4/30/20 - The hull is washed and ready for varnish.

Once coat of varnish is applied.

5/2/20 - Several coats of varnish have been applied.

5/4/20 - The deck is ready for varnish.

First varnish coat on the hatch covers.

5/5/20 - First coat of varnish on the deck.

5/7/20 - Several coats of varnish have been applied.

5/8/20 - Deck rigging and hatch straps are installed.