This boat was built with soft padeyes, hatches and bulkheads, perimeter lines, and an upgraded finish.
Length: 20 feet
Beam: 30 inches
Weight: 60 lbs.
Click on photos for slideshow
-
12/8/17 - The boat is finished.
-
Pygmy Osprey Double
-
Pygmy Osprey Double
-
9/25/17 - The first 4 panels of the hull are loosely wired together.
-
The seams are filled with thickened epoxy.
-
9/29/17 - Half of the hull is sanded smooth.
-
Fiberglass cloth is smoothed on the hull.
-
10/2/17 - The hull is flipped over and temporary frames for the deck are attached.
-
All hull panels are wired together.
-
10/17/17 - The interior is fiberglassed.
-
10/18/17 - The bow and stern tips are filled with thickened epoxy.
-
The deck has been sanded smooth in preparation for fiberglassing.
-
11/2/17 - The forward cockpit coaming riser is epoxied in place.
-
11/2/17 - The coaming lips are fiberglassed.
-
11/14/17 - Toggles for the strapless hatch system are laminated together.
-
11/29/17 - The first coat of varnish is on the hull.
-
12/5/17 - Soft Padeyes are installed.
