12/3/20 - The boat is in the workshop.

12/4/20 - The hull is sanded and ready for fiberglass.

12/6/20 - Fiberglass cloth is laid on the hull.

The glass is saturated with epoxy.

12/8/20 - The hull is given two fill coats of epoxy.

11/9/20 - The deck is wired together.

12/12/20 - Fiberglass is laid on the underside of the deck.

The entire underside of the deck is given a coat of epoxy.

12/15/20 - The inside of the hull is ready for fiberglass.

Interior has been saturated with epoxy.

12/16/20 - Footbrace studs are installed.

The deck is epoxied in place.

12/17/20 - The inside of the shear joint is filled with epoxy and fiberglassed.

Other sheer joint is epoxied.

12/18/20 - The deck is sanded half way.

Fiberglass is laid on the deck.

12/19/20 - The fiberglass is saturated with epoxy.

12/21/20 - Strapless hatches parts are fabricated.

Bulkheads are fiberglassed.

Two epoxy fill coats have been applied to the deck.

12/23/20 - Hatch shapes are traced on the deck.

Aft hatch is cut out.

Forward hatch is cut out.

Aft bulkhead is epoxied in place.

Forward bulkhead is epoxied in place.

12/24/20 - The coaming riser is epoxied in place.

12/28/20 - The kayak is stood on end for epoxy endpours.

12/30/20 - The coaming lip is fiberglassed.

12/31/20 - The aft hatch lip is epoxied in place.

Coaming gets a fill coat of epoxy.

Forward hatch lip is epoxied in place.

1/3/21 - The deck and half the hull is finish sanded.

1/6/21 - The strapless hatch system is epoixed to the hatch lids.

The entire hull has been sanded.

1/7/21 - The first coat of varnish is applied to the hull.

1/10/21 - The deck is ready for varnish.

1/11/21 - Several coats of varnish have been applied.

1/13/21 - Several coats of varnish have been applied.

Strapless hatch system is setup.

Upgraded seat is installed.